Single Fiber 10/100Base Fiber Optic Media Converters |
The Single Fiber 10/100Base Fiber Optic Media Converters complies with IEEE 802.3 standards. It is designed to convert data signal between 10/100 Base-TX and 100 Base Fx Fast Ethernet. The single fiber fast ethernet media converters are connected between Fiber cable and twisted cable segments with network operating smoothly.This converter can be used as a standard alone unit or a slide-in module to fit the 19 converter rack. Adopting WDM technology, Single Fiber 10/100Base Fiber Optic Media Converters takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. BiDi WDM - Wave Division Multiplexing Technology allows you use just a 1 fiber cable instead of 2, because transmit and receive channels are separated by different wavelenghts. Converters universal - they can work as standalone modules in point to point applications with external power supply modules - or same converter can be used as a plug in module in our converter chassis. Such universal design, made by sunrise intl saves a lot of money and time to your network planning - you no need thing, how much units you need as standalone and how much units you need as plug in modules in chassis - just order same module and decide later.Also, it does not matters, what type of TX/RX are you using at central side or remote side, they will always operate smooth. Single Fiber 10/100Base Fiber Optic Media Converter Features Complies with IEEE802.3 and IEEE802.3u 10/100Base-TX and 100Base-FX MTU size supported 1600 bytes maximum Supports pure converter mode data forwarding for extreme low latency Built in 128Kb RAM for data buffer Supports modified cut-through frame forwarding for low latency Optional forward fragments 10/100Mbps and full/half duplex automatically configure in TP port Supports end fault function (optional) MDI/MDI-X Auto Negotiation Support EEPROM configuration LED Indicators: POWER, FX LINK/ACT, 100, TP LINK/ACT, FDX/COL. FCC Class A & CE approved LLR, LFP - Link Loss Return (LLR), Link Failure Pass (LFP) features supported RoHs compliant Only 1 fiber used instead of 2 - WDM BiDi technology Stainless steel parts (value added feature) Standalone, Wallmount or Hotpluggable in 19' chassis - universal design Single Fiber 10/100Base Fiber Optic Media Converters Specification Wavelength: TX1310nm/RX1550nm; TX1550nm/RX1310nm, for high distance TX1490nm/RX1550nm; TX1550nm/RX1490nm Technical: BER: <1E-8 Data Buffer: 128Kb Power temperature variation: 0.2mw/℃ Input Power Range (dBm): 0~-40 Imax: 800mA Power: 2.5 W High perfomance ICPLUS IP113C chipset based Fiber cable(m): 8.3/125, 8.7/125, 9/125 or 10/125single-mode, only 1 strand is needed Maximum distance: 120 km (available ordering options 20/40/60/80/100/120 km) Input power: IA@+5VDC or 110~260VAC or 48VDC Dimensions: 95×70×26mm (external power), 95×70×26mm (external power ) Environment: Relative humidity;5% to 90% Operating temperature: 0 to 70 degrees Storage temperature : -20 to 70 |