32 Channel Optical Video Transceiver,with optional digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / Ethernet / Telephone / Dry contact over one multimode or single-mode optical fiber. These 32 Channel Optical Video Transceivers are typically used in applications where the cameras have P/T/Z capabilities.
32 Channel Optical Video Transceivers Characteristic Thirty-two Channels Un-compressed CCTV video over one fiber. 8-bit video processing, Compatible with NTSC, PAL, or SECAM CCTV, Instantaneous Transmission. One Channel Ethernet, Supports 10/100BASE-TX, IEEE Std.802.3. Digital multiplexing technology. Support analog Audio, RS-485/232 data, Contact closure and Ethernet over one single-mode fiber. 24-bit audio processing. Transparent transmission for multi protocol data formats. Using Wavelength Division Multiplexing(WDM) Technical indicators 32 Channel Optical Video Transceivers Video Channels: 32 simplex Input/Output Signal: 1.0 Vpk – pk Bandwidth: 6.5 MHz Video Sampling Rate:15 MHz Signal-to-Noise Ratio: >58 dB Input/Output Impedance: 75 ohms Differential Phase: 0.7° Differential Gain: <1% 32 Channel Optical Video Transceivers Audio Input Impedance: 47K ohms unbalanced Output Impedance: 10K ohms unbalanced Signal-to-Noise Ratio: >75 dB Audio Sampling Rate: 58 kHz Bandwidth: 20 Hz to 20 kHz 32 Channel Optical Video Transceivers Data Formats: RS-232 (3-wire), TTL, RS-422, RS-485 (2-wire/4-wire) Transparent transmission for Manchester, Biphase, SensorNet Baud Rate: 0 kbps to 115.2 kbps Bit Error Rate: <1.0E-9 Ethernet 10/100BASE-TX, CAT5 RJ-45, IEEE Std. 802.3, Full Speed 10M/100M Ethernet duplex Optical Fiber Cable: Single mode Optical Connector: FC Emitter: FB or DFB Wavelength: 1310 nm or 1550 nm Transmission Distance can reach 100 Km 32 Channel Optical Video Transceivers Environmental Operating Temperature: -25°C to 75 °C Maximum Humidity: 95% relative, Non-condensing Mechanical Dimensions: 440X225X132mm Construction: Aluminum Power Supply Protection: Solid-state short circuit protection External Power Supply, Input:100~240 V AC 50/60Hz Output: 9 V DC, 4 A Electromagnetic compatibility EMC Directive 2004/108/EC EN60950-1:2006
|